Utilize este identificador para referenciar este registo:
http://hdl.handle.net/10773/35894
Título: | Simultaneous measurement of displacement and temperature using a balloon-like hybrid fiber sensor |
Autor: | Santos, João P. Bierlich, Jörg Kobelke, Jens Ferreira, Marta S. |
Palavras-chave: | Optical Fibers Displacement Temperature Fiber Optic Technology Interferometry Balloon-shaped Fiber Sensor |
Data: | 1-Ago-2022 |
Editora: | Optica Publishing Group |
Resumo: | A fiber sensor based on a silica capillary in a balloon-like shape for simultaneous measurement of displacement and temperature is proposed and experimentally demonstrated. The sensor is fabricated by splicing a segment of a hollow-core fiber between two single-mode fibers (SMF) and by creating a balloon shape with the capillary at the top-center position. The SMF-capillary-SMF configuration excites an antiresonant (AR) guidance, and the balloon shape enhances the Mach-Zehnder interferometer (MZI). Experimental results show that, for a balloon length of 4.0 cm and a capillary length of 1.2 cm, the AR is insensitive to displacement and its sensitivity to temperature is 14.3 pm/°C, while the MZI has a sensitivity to displacement of 1.68 nm/mm in the range between 0 and 5 mm and a sensitivity to temperature of 28.6 pm/°C, twice the value of the AR. The proposed fiber sensor has only one sensing element in one configuration, which makes it simple to fabricate as well as low cost. |
Peer review: | yes |
URI: | http://hdl.handle.net/10773/35894 |
DOI: | 10.1364/OL.465403 |
ISSN: | 0146-9592 |
Aparece nas coleções: | DFis - Artigos I3N-FSCOSD - Artigos |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
2022_accepted_version_SANTOS_hybrid balloon.pdf | 692.42 kB | Adobe PDF | Ver/Abrir |
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.