Utilize este identificador para referenciar este registo:
http://hdl.handle.net/10773/20118
Título: | Extrusion of ceramic pastes: An alternative approach to obtain the Benbow's model parameters |
Autor: | Vitorino, N. Ribeiro, M. J. Abrantes, J. C. C. Labrincha, J. A. Frade, J. R. |
Palavras-chave: | TUBES FLOW |
Data: | 2014 |
Editora: | ELSEVIER SCI LTD |
Resumo: | This paper presents an alternative approach to estimate the parameters of the Benbow equation, widely used to define the contribution of parallel and convergent fluxes during the extrusion of ceramic bodies. The proposed method is based on a simplification of the equation that describes the difference of the extrusion pressure through dies with distinct lengths. This simplification, combined with an analytic change of the equation, allows obtaining two parameters from the experimental results, instead of using numerical fitting of reported values on the literature. The advantages of the proposed strategies are: (i) only three of the five parameters are numerically obtained, minimizing the risks of convergence to solutions mathematically corrected but without physical significance; and (ii) the relative deviations between Benbow's model and experimental results are lower when compared with those obtained when all parameters are numerically obtained. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved. |
Peer review: | yes |
URI: | http://hdl.handle.net/10773/20118 |
DOI: | 10.1016/j.ceramint.2014.05.145 |
ISSN: | 0272-8842 |
Versão do Editor: | 10.1016/j.ceramint.2014.05.145 |
Aparece nas coleções: | CICECO - Artigos |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Extrusion of ceramic pastes An alternative approach to obtain the Benbows model parameters_10.1016j.ceramint.2014.05.145.pdf | 334.57 kB | Adobe PDF |
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.