Please use this identifier to cite or link to this item:
http://hdl.handle.net/10773/2451
Title: | Optimização da cura de resinas fenólicas por tecnologia de infravermelho |
Author: | Silva, Tiago Alexandre Pinto Reis Martins da |
Advisor: | Cabral, Eduardo Gil Simões dos Santos Pereira, António Manuel de Bastos |
Keywords: | Engenharia mecânica Tecnologia de infravermelhos Resinas sintéticas Fenóis |
Defense Date: | 2008 |
Publisher: | Universidade de Aveiro |
Abstract: | Este trabalho visou a optimização da cura de resinas fenólicas, utilizando uma estufa de cura, equipada com emissores de infravermelho, seleccionados com base em testes preliminares. A primeira fase deste trabalho consistiu na avaliação das condições de cura, escolha de emissores e caracterização das variáveis do processo. O estudo foi baseado em, primeiro, na simulação numérica das condições de cura estática de lixas, e depois nos resultados obtidos com a realização de testes laboratoriais, e de ensaios à escala piloto numa estufa de 3 metros, aperfeiçoada para o efeito. Os resultados experimentais mostraram que a tecnologia de infravermelho se adequa à cura das lixas. As velocidades de cura variaram entre 1 e 5 m/min, enquanto que as temperaturas medidas na lixa se situaram na gama 80ºC a 170ºC, dependentes de cada produto. ABSTRACT: This work aimed to optimize the cure of the phenolic resin, using a chamber equipped with infra-red ray emitters, being these chosen on the basis of preliminary tests. The first phase of this work consisted of the evaluation of the conditions of cure, choice of emitters and characterization of the variable of the process. The study it was based on, first, the numerical simulation of the conditions of static cure of sandpapers, and later in the results gotten with the accomplishment of laboratorial tests, and test at scale pilot in a chamber with 3 meters long, rearranged for the effect. The experimental results had shown that the infra-red technology it adjusts to the cure of the sandpapers. The cure speeds had varied between 1 and 5 m/min, whereas the temperatures measured in the sandpaper had pointed out in gamma of 80ºC to 170ºC, dependents of each product. |
Description: | Mestrado em Engenharia Mecânica |
URI: | http://hdl.handle.net/10773/2451 |
Appears in Collections: | UA - Dissertações de mestrado DEM - Dissertações de mestrado |
Files in This Item:
File | Size | Format | |
---|---|---|---|
2008001582.pdf | 1.55 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.