Please use this identifier to cite or link to this item: http://hdl.handle.net/10773/20364
Title: Diamond-SAW devices: a reverse fabrication method
Author: Mukherjee, Debarati
Oliveira, Filipe J.
Silva, Rui F.
Carreira, Jose F.
Rino, Luis
Correia, Maria R.
Rotter, Shlomo Z.
Alves, Luis N.
Mendes, Joana C.
Keywords: ACOUSTIC-WAVE DEVICES
THIN-FILMS
NANOCRYSTALLINE DIAMOND
RAMAN-SPECTROSCOPY
LITHIUM-NIOBATE
LINBO3
NANODIAMOND
NUCLEATION
DEPOSITION
SENSORS
Issue Date: 2016
Publisher: WILEY-V C H VERLAG GMBH
Abstract: Surface acoustic wave (SAW) devices are key components in modern wireless communication systems. Besides being used as reflective delay lines, filters or resonators, SAW devices can be used as sensors and fixed-code identification tags. Due to their high-acoustic velocity, diamond films can be combined with piezoelectric materials to fabricate diamond-based SAW devices with potential for high frequency applications. This paper presents results of coating commercial SAW delay lines with diamond films. The films were deposited on lithium niobate under different conditions in a hot filament chemical vapour deposition system. Seeding was performed using 6-12 mu m diamond grit and 20-30 nm nano-diamond particles based suspensions. After tuning the deposition conditions, dies of 74 MHz delay lines were coated with diamond. The quality, morphology and conformability of the coatings were evaluated by scanning electron microscopy (SEM) and Raman spectroscopy. The integrity of the interdigitated transducers (IDTs) after deposition was evaluated by SEM. S-parameters of as-bought and diamond-coated dies were measured using a network analyser. Although the frequency response is attenuated after diamond deposition, integrity of the IDTs and the operating principle of the devices are kept intact. These preliminary results open the door to a simplified fabrication procedure of diamond-based SAW devices. (C) 2016 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim
Peer review: yes
URI: http://hdl.handle.net/10773/20364
DOI: 10.1002/pssc.201510313
ISSN: 1862-6351
Publisher Version: 10.1002/pssc.201510313
Appears in Collections:CICECO - Artigos

Files in This Item:
File Description SizeFormat 
Diamond-SAW devices A reverse fabrication method_10.1002pssc.201510313.pdf422.4 kBAdobe PDFrestrictedAccess


FacebookTwitterLinkedIn
Formato BibTex MendeleyEndnote Degois 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.