Please use this identifier to cite or link to this item:
http://hdl.handle.net/10773/6113
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ramos, A.M. | pt |
dc.contributor.author | Relvas, C. | pt |
dc.contributor.author | Simões, J.A. | pt |
dc.date.accessioned | 2012-02-09T15:19:23Z | - |
dc.date.issued | 2003 | - |
dc.identifier.issn | 1355-2546 | pt |
dc.identifier.uri | http://hdl.handle.net/10773/6113 | - |
dc.description.abstract | The purpose of this study was to compare costs and dimensional control parameters between same geometry parts obtained by same prototyping techniques using different material moulds. Vacuum casting was used to obtain prototypes of a three-blade helix of a motor boat propeller. Aluminium and room temperature vulcanising (RTV) rubber moulds were manufactured and tested within the study. Manufacturing costs and dimensional control parameters were used within the comparison study. For the dimensional deviation performance factor used, no significant differences were observed relatively to the dimensional control parameters measured. However, the average deviations were smaller for the RTV rubber mould prototype. | pt |
dc.language.iso | eng | pt |
dc.relation.uri | http://www.scopus.com/inward/record.url?eid=2-s2.0-0037258647&partnerID=40&md5=3260eb6ccdc569585352942c10508738 | |
dc.rights | restrictedAccess | por |
dc.subject | Costs | pt |
dc.subject | Aluminium | pt |
dc.subject | Rapid prototyping | pt |
dc.subject | Casting | pt |
dc.title | Vacuum casting with room temperature vulcanising rubber and aluminium moulds for rapid manufacturing of quality parts: a comparative study | pt |
dc.type | article | pt |
dc.peerreviewed | yes | pt |
ua.distribution | international | pt |
degois.publication.firstPage | 111 | pt |
degois.publication.issue | 2 | pt |
degois.publication.issue | 2 | |
degois.publication.lastPage | 115 | pt |
degois.publication.title | Rapid Prototyping Journal | pt |
degois.publication.volume | 9 | pt |
dc.date.embargo | 10000-01-01 | - |
dc.identifier.doi | 10.1108/13552540310467121 | * |
Appears in Collections: | DEM - Artigos |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
2003_Vacuum casting with room temperature vulcanising rubber and aluminium moulds for RM.pdf | cópia final | 212.37 kB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.