Please use this identifier to cite or link to this item: http://hdl.handle.net/10773/29790
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorVicente, Romeu da Silvapt_PT
dc.contributor.advisorFerreira, Victor Miguel Carneiro de Sousapt_PT
dc.contributor.authorRodrigues, Lucas Fernandes de Sousapt_PT
dc.date.accessioned2020-11-12T14:47:01Z-
dc.date.issued2019-12-
dc.identifier.urihttp://hdl.handle.net/10773/29790-
dc.description.abstractA presente dissertação debruça-se sobre a avaliação dos pavimentos radiantes, focando especificamente sobre o estudo de betonilhas de preenchimento usado nestes sistemas. Para esse efeito foi construído três lajes com sistemas de piso radiante hidráulico com as mesmas medidas, forma e passo. Cada laje foi executada com uma formulação de betonilha diferente de modo a puder comparar os resultados entre estas. A dissertação está estruturada em seis capítulos. É feito o enquadramento e motivação do estudo, apresentado os tipos de sistemas de pavimento radiante e suas componentes, de seguida é feita a apresentação dos materiais utilizados na construção das lajes da campanha experimental, metodologia de ensaios seguida e os principais resultados obtidos. Por fim são apresentadas as principais conclusões. A campanha experimental consistiu em três ensaios. O primeiro ensaio consistiu em analisar o comportamento térmico das betonilhas com o sistema de aquecimento do circuito de água quente das três lajes. Este ensaio teve como objetivo determinar o tempo de resposta de aquecimento de cada uma das betonilhas utilizadas. Após um determinado tempo de aquecimento, o sistema de aquecimento foi desligado de modo a poder observar o modo e calcular o tempo e taxa de arrefecimento das lajes. Durante a fase de aquecimento foram sendo registadas imagens termográficas. O segundo ensaio consistiu em deixar ligado o sistema de aquecimento ligado durante um período de 24 horas. Durante este tempo pode-se analisar o comportamento térmico e taxa de aquecimento de todas as betonilhas. O terceiro ensaio consistiu no estudo do sistema em respeito ao tempo de funcionamento da fonte de calor para manter a temperatura da superfície da betonilha das lajes entre um intervalo de temperatura de trabalho (máximo e mínimo). Por comparação, foi possível identificar quais das soluções é mais eficiente em respeito à economia de energia, isto é, menor tempo de funcionamento da fonte de calor.pt_PT
dc.description.abstractThis dissertation focuses on the evaluation of radiant floor systems, focusing specifically on the study of mortar screeds used with these systems. For this purpose, three slabs were built with a hydraulic radiant floor system of the same size, shape and pitch. Each slab was executed with a different mortar screed formulation in order to compare the results between them. The dissertation is structured in six chapters. The study is framed and motivated, presenting the types of radiant floor heating systems and their components, followed by the presentation of the materials used in the construction of the slabs of the experimental campaign, the test methodology followed, and the main results obtained. Finally, the main conclusions are presented. The experimental campaign consisted of three tests. The first test consisted in analysing the thermal behaviour of the mortar screeds with the heating system of the hot water circuit of the three slabs. This test aimed to determine the heating response time of each of the mortar screeds used. After a certain heating time, the heating system was turned off in order to observe the mode and calculate the slab cooling time and rate. During the heating phase thermographic imaging was done. The second test consisted in leaving the heating system on for a period of 24 hours. During this time, it was analysed the thermal behaviour and heating rate of all mortar screed solutions. The third test consisted in studying the system with respect to the heat source operating time to maintain the slab screed surface temperature between a working temperature range (maximum and minimum). By comparison, it was possible to identify which of the solutions is the most efficient in terms of energy saving, this is, the shortest operating time of the heat source.pt_PT
dc.language.isoporpt_PT
dc.rightsembargoedAccesspt_PT
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/pt_PT
dc.subjectPiso radiante hidráulicopt_PT
dc.subjectBetonilhapt_PT
dc.subjectTemperaturapt_PT
dc.subjectCondutividade térmicapt_PT
dc.subjectcalorpt_PT
dc.titleEstudo do desempenho térmico de um piso radiante com diferentes formulações de betonilhapt_PT
dc.typemasterThesispt_PT
thesis.degree.grantorUniversidade de Aveiropt_PT
dc.date.embargo2022-01-07-
dc.description.masterMestrado em Engenharia Civilpt_PT
Appears in Collections:UA - Dissertações de mestrado
DECivil - Dissertações de mestrado

Files in This Item:
File Description SizeFormat 
Documento_Lucas_Rodrigues.pdf5.01 MBAdobe PDFView/Open


FacebookTwitterLinkedIn
Formato BibTex MendeleyEndnote Degois 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.