Please use this identifier to cite or link to this item:
|Title:||Influence of BiFeTaO3 addition on the electrical properties of Na0.4725K0.4725Li0.055NbO3 ceramics system using impedance spectroscopy|
Kholkin, A. L.
|Publisher:||ELSEVIER SCIENCE SA|
|Abstract:||Polycrystalline samples of (1 - x)(Na0.4725K0.4725Li0.055NbO3) - x(BiFe0.5Ta0.5O3) (where x = 0.005 and 0.007 were prepared by using a solid state reaction technique. The XRD patterns of the samples at room temperature shows perovskite phase with monoclinic structure. The dielectric constant for x = 0.007 is maximum. Detailed studies of dielectric and impedance properties of the materials in a wide range of frequency (100 Hz-1 MHz) and temperatures (RT-500 degrees C) shows that dielectric properties were strongly temperature and frequency dependent. Dielectric and electrical properties of samples, indicate that the Curie temperature shifted to higher temperature side with the increase in frequency. The AC conductivity also increases with increase in frequency. The low value of activation energy obtained for the ceramic samples could be attributed to the influence of electronic contribution to the conductivity. The plots of Z '' and M '' vs frequency at various temperatures shows peaks in the higher temperature range (>320 degrees C). The compounds show dielectric relaxation, which is found to be of non-Debye type and the relaxation frequency shifted to higher side with increase in temperature. The Nyquist plot and conductivity studies showed the NTCR character of samples. (C) 2015 Elsevier B.V. All rights reserved.|
|Appears in Collections:||CICECO - Artigos|
Files in This Item:
|Influence of BiFeTaO3 addition on the electrical properties of Na0.4725K0.4725Li0.055NbO3 ceramics system using impedance spectroscopy_10.1016j.jallcom.2015.02.149.pdf||1.87 MB||Adobe PDF|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.