Please use this identifier to cite or link to this item: http://hdl.handle.net/10773/19888
Title: Thickness dependence of structure and piezoelectric properties at nanoscale of polycrystalline lead zirconate titanate thin films
Author: Araujo, E. B.
Lima, E. C.
Bdikin, I. K.
Kholkin, A. L.
Keywords: X-RAY-DIFFRACTION
RIETVELD REFINEMENT
PBZR1-XTIXO3 PZT
IMPRINT BEHAVIOR
DEPOSITION
POLARIZATION
PYROCHLORE
CAPACITORS
KINETICS
POWDER
Issue Date: 2013
Publisher: AMER INST PHYSICS
Abstract: Lead zirconate titanate Pb(Zr0.50Ti0.50)O-3 (PZT) thin films were deposited by a polymeric chemical method on Pt(111)/Ti/SiO2/Si substrates to understand the mechanisms of phase transformations and the effect of film thickness on the structure, dielectric, and piezoelectric properties in these films. PZT films pyrolyzed at temperatures higher than 350 degrees C present a coexistence of pyrochlore and perovskite phases, while only perovskite phase grows in films pyrolyzed at temperatures lower than 300 degrees C. For pyrochlore-free PZT thin films, a small (100)-orientation tendency near the film-substrate interface was observed. Finally, we demonstrate the existence of a self-polarization effect in the studied PZT thin films. The increase of self-polarization with the film thickness increasing from 200 nm to 710 nm suggests that Schottky barriers and/or mechanical coupling near the film-substrate interface are not primarily responsible for the observed self-polarization effect in our films. (C) 2013 AIP Publishing LLC
Peer review: yes
URI: http://hdl.handle.net/10773/19888
DOI: 10.1063/1.4801961
ISSN: 0021-8979
Publisher Version: 10.1063/1.4801961
Appears in Collections:CICECO - Artigos



FacebookTwitterLinkedIn
Formato BibTex MendeleyEndnote Degois 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.