Please use this identifier to cite or link to this item:
http://hdl.handle.net/10773/12362
Title: | Caracterização e otimização do polimento de grés porcelânico |
Author: | Monteiro, Ana Isabel Mourão |
Advisor: | Vilarinho, Paula |
Keywords: | Engenharia de materiais Grés Revestimentos cerâmicos Indústria cerâmica |
Defense Date: | 2013 |
Publisher: | Universidade de Aveiro |
Abstract: | Este trabalho teve como objetivo o estudo do processo de polimento em produtos de grés porcelânico da empresa Revigrés.
O polimento é um processo que melhora as características estéticas da superfície da peça, aproximando desta forma a sua aparência às pedras naturais.
Durante as três etapas de polimento, foi feito um estudo sistemático da caracterização estrutural, microestrutural e das propriedades dos produtos polidos, para se entender que fenómenos acontecem em cada uma destas etapas e encontrar soluções para os problemas descobertos.
A primeira etapa é a de calibração que tem como finalidade planificar a superfície. Esta danifica fortemente a superfície induzindo defeitos que são irrecuperáveis com as etapas seguintes. As seguintes etapas eliminam os riscos, tornam a superfície uniforme e conferem brilho. Os defeitos incitados provocam uma diminuição da resistência às manchas. Por forma a contornar o problema a empresa coloca uma cera impermeabilizante na superfície da peça polida.
De forma a diagnosticar o problema na qualidade da superfície polida, foi eliminada a etapa de calibração no processo de polimento das peças de grés porcelânico técnico e conclui-se que a supressão desta etapa mantem as propriedades técnicas, como a absorção de água e a porosidade aparente, mas piora os atributos estéticos.
Como soluções foi sugerido, fazer alterações no abrasivo usado de forma a não danificar tanto a superfície, ou eliminar a etapa de calibração e melhorar as restantes. The current work aims at studying the polishing process of porcelain tiles from Revigrés Company. Polishing is a process that enhances the esthetic characteristics of the surface of the ceramic pieces, by achieving a higher resemblance to the natural stones. During the three stages of the polishing procedure, a systematic study of the ceramic pieces was followed, concerning the structural and microstructural properties of the polished products, in order to understand the effect of each stage and come up with solutions for the occurring problems. The first stage is the calibration stage, which aims at flattening the surface. This stage highly damages the surface, inducing defects that are irrecoverable after the succeeding stages. The following steps eliminate the scratches, making the surface more uniform and confer brightness. The induced defects provoke decrease of the stain resistance. In order to resolve this problem, the company’s strategy is the application of a waterproof wax on the surface of the polished piece. In order to diagnose the problem on the quality of the polished surface, the calibration stage of the polishing process of the technical porcelain samples was omitted and it was concluded that the elimination of this stage maintains the technical properties, such as water absorption and apparent porosity, however it deteriorates the esthetical attribute. The suggested solutions are modifications of the utilized abrasive, in order to avoid excessive damaging of the surface, or elimination of the calibration stage and enhancement of the next stages. |
Description: | Mestrado em Engenharia de Materiais |
URI: | http://hdl.handle.net/10773/12362 |
Appears in Collections: | UA - Dissertações de mestrado DEMaC - Dissertações de mestrado |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.