Please use this identifier to cite or link to this item:
http://hdl.handle.net/10773/10226
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Graça, Manuel | pt |
dc.contributor.advisor | Cunha, António Ferreira da | pt |
dc.contributor.author | Baptista, Diogo Fernandes | pt |
dc.date.accessioned | 2013-04-18T09:44:31Z | - |
dc.date.available | 2013-04-18T09:44:31Z | - |
dc.date.issued | 2012 | - |
dc.identifier.uri | http://hdl.handle.net/10773/10226 | - |
dc.description | Mestrado em Engenharia Física | pt |
dc.description.abstract | Neste trabalho é, inicialmente, apresentada uma breve revisão do estado da arte sobre as características físicas do material em estudo (TiO2) bem como da estrutura pretendida (opala inversa). Em seguida é apresentado as abordagens que foram realizadas para obter essa estrutura e as técnicas utilizadas para a sua caracterização estrutural e morfológica. Os filmes foram caracterizados por difração de raios-X, espectroscopia de Raman, microscopia ótica e eletrónica de varrimento. Conclui-se que para obter uma estrutura opala inversa o melhor procedimento deverá ser numa primeira fase a deposição das esferas de poliestireno, numa segunda fase a impregnação do TiO2 seguido de um tratamento térmico superior a 250 ºC com uma rampa de aquecimento inferior a 5 ºC/min. | pt |
dc.description.abstract | In this work, initially, a description of the state of the art of the study material (TiO2) and inverse opal structures is showed, along with the usual methods in the production of this kind of structures. After, the preparation method and the results of the structural measurements are presented. The samples were characterized by X rays diffraction, Raman spectroscopy, optical microscopy and scanning electronic microscopy. The results show that to obtain the inverse opal structure it is preferred to deposit initially the polystyrene spheres and then the TiO2 precursor followed by a heat treatment above 250 ºC with an increase of the temperature less than 5 ºC/min | pt |
dc.language.iso | por | pt |
dc.publisher | Universidade de Aveiro | pt |
dc.rights | openAccess | por |
dc.subject | Engenharia física | pt |
dc.subject | Dióxido de titânio - Propriedades físicas | pt |
dc.subject | Estrutura atómica | pt |
dc.subject | Nanoestruturas | pt |
dc.subject | Filmes finos | pt |
dc.title | Fabricação e caracterização de estruturas periódicas de TiO2 | pt |
dc.type | masterThesis | pt |
thesis.degree.level | mestrado | pt |
thesis.degree.grantor | Universidade de Aveiro | pt |
Appears in Collections: | UA - Dissertações de mestrado DFis - Dissertações de mestrado |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.