Please use this identifier to cite or link to this item:
http://hdl.handle.net/10773/21283
Title: | Analysis of the cohesive zone and crack length correction in the adhesively bonded double cantilever beam specimen |
Author: | Morais, Alfredo |
Keywords: | Adhesive joints Fracture Double Cantilever Beam Cohesive zone modelling Beam model |
Issue Date: | 12-Dec-2017 |
Publisher: | Taylor & Francis |
Abstract: | The double cantilever beam specimen has been increasingly employed to enable the development of cohesive zone models for adhesive joints. Evaluation of the traction-separation law requires elaborate experimental techniques and usually relies on data measured until the crack initiation point. Nonetheless, current standards stipulate fracture energy measurements under steady-state crack propagation. This paper investigated the influence of the cohesive zone on the commonly used corrected beam theory data reduction scheme. Analytical solutions for the elastic-perfectly plastic, bilinear and trapezoidal laws were developed using a beam model. The role of the elastic traction decay zone was found to be significant for high strength moderately tough adhesives. Nevertheless, the results showed that the sensitivity of the crack length correction to the cohesive zone can be exploited to obtain approximate traction-separation laws. |
Peer review: | yes |
URI: | http://hdl.handle.net/10773/21283 |
DOI: | 10.1080/00218464.2016.1219256 |
ISSN: | 0021-8464 |
Appears in Collections: | DEM - Artigos |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Analysis of the cohesive zone and crack length correction in the adhesively bonded double cantilever beam specimen.pdf | main document | 1.67 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.